3T Suite Internet

Connecting to the wireless

To connect to the UF wireless and access the Internet and UF resources (e.g. HiPerGator) please follow these instructions. Follow the steps below to get the connection setup; these steps will only need to be done the first time you set up the connection.

  1.  Connect to the WIFI network named “ufinfo”

  2.  Direct your Internet browser to http://getonline.ufl.edu

  3.  Click “Auto Configuration”

Using this method, the CloudPath installer will automatically set up the Policy Key. Once that is installed, connection to the general “uf” wireless network will be possible. If you have any issues with the CloudPath auto installer, please see http://getonline.ufl.edu/faq.php for more information.


Connecting to the UF Health VPN

If access is needed to UF Health resources from the wireless connection, the UF Health VPN will be needed. Follow the steps below to get the VPN setup on your machine.

  1. Direct your browser to: https://ufhealth.org/vpn

  2. From the right side of the page, download the PulseSecure client for various OS options.

  3. Install this client for your operating system

Some OS systems require a reboot after installation of the Pulse client. Once the VPN client is started please note that you will need to select a realm that matches your
account. If you are using a GatorLink account, please select \UFAD” and if you are using a Shands account, please select \Shands”. If you have any issues setting up the client or connecting, please see https://ufhealth.org/uf-health-vpn-installation-help for more information.